Glutton 的波纹管密封设计泵非常适合风送和无气喷涂应用。 的分离式双柱塞泵设计用于处理对切变和热更加敏感的涂料
功能：
- 采用波纹管密封设计即可不用常规的喉部密封，为对水分敏感的涂料带来可靠性高
- 可逆的出口歧管简化了水管设施
- 垂直球阀设计确保球的磨损保持均衡和使用寿命长
| Glutton 1200 Plunger Pumps | |
| Maximum Fluid Working Pressure | 1200 psi |
| Maximum Air Input Pressure | 100 psi |
| Air Operating Range | 25–100 psi |
| Maximum Continuous Pump Speed | 60 cpm |
| Fluid Flow at 60 cpm | 2 gpm |
| Fluid Volume per Cycle | 0.034 gal |
| Maximum Suction Lift (water) | 15 ft |
| Maximum Operating Temperature | 150°F |
| Air Inlet | 1/2 npt(f) |
| Fluid Inlet | 1.25 npt(f) |
| Fluid Outlet | 1 npt(f) |
| Weight | 78 lb |
| Wetted Parts | |
| Model 220664 and 237009 | Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220664 only), nylon (237009 only), PTFE, |
| Model 220667 and 237012 | 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220667 only), nylon (237012 only), PTFE |
| Glutton 2500 Plunger Pumps | |
| Maximum Fluid Working Pressure | 2500 psi |
| Maximum Air Input Pressure | 100 psi |
| Air Operating Range | 25–100 psi |
| Maximum Continuous Pump Speed | 60 cpm |
| Fluid Flow at 60 cpm | 0.9 gpm |
| Fluid Volume per Cycle | 0.015 gal |
| Maximum Suction Lift (water) | 6 ft |
| Maximum Operating Temperature | 150°F |
| Air Inlet | 1/2 npt(f) |
| Fluid Inlet | 1.25 npt(f) |
| Fluid Outlet | 3/4 npt(f) |
| Weight | 61 lb |
| Wetted Parts | |
| Model 220665 and 237010 | Carbon steel, stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220665 only), nylon (237010 only) |
| Model 220668 and 237013 | 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220668 only), nylon (237013 only) |
水性
溶剂型
高固含量
Xirallic
耐化学试剂涂层 (CARC)
Metallics
紫外光固化涂层
一般金属涂饰 - 泵送
木材涂饰 - 泵送
塑料涂饰产品 - 泵送
农业设备 -制造
施工设备 - 制造
耐化学试剂涂层 (CARC)
家具涂饰/制造
一般金属涂饰/制造
木制品制造
铁路
废物管理 - 设备制造
私人房车
房车
木材及木制品 - 泵
重型设备制造
